How to make an Avermedia AverTV Volar Green HD work?

How can I get a driver to make my Avermedia AverTV Volar Green HD work ?

enter image description here


Now solved. See below:

Here is Solutions:

We have many solutions to this problem, But we recommend you to use the first solution because it is tested & true solution that will 100% work for you.

Solution 1

Solution on Ubuntu 13.10 & 14.04

from this source, note that this solution is simpler than on 12.04


1. Download the firmware

$ cd /lib/firmware/
$ sudo wget http://xgazza.altervista.org/Linux/DVB/dvb-usb-af9035-01.fw
$ sudo wget http://xgazza.altervista.org/Linux/DVB/dvb-usb-af9035-02.fw

2. Install the needed application

$ sudo apt-get install git
$ sudo apt-get install  libproc-processtable-perl

3. Install the latest v4l-dvb

from the wiki How to Obtain, Build and Install V4L-DVB Device Drivers:

$ git clone --depth=1 git://linuxtv.org/media_build.git
$ cd media_build 
$ ./build

4. Reboot

$ sudo reboot

5. Check if device is properly installed

see below

Solution 2

Solution on Ubuntu 12.4 kernel 3.2


0. Check your kernel

$ uname -r
3.2.0-39-generic-pae

1. Plug in the USB TV Tuner

You can check that it is correctly plug in with lsusb

$ lsusb
Bus 001 Device 002: ID 07ca:a835 AVerMedia Technologies, Inc.

2. Download the driver for AF9035 dvb-t usb dongle (3.2.x kernel version)

Note that this driver should work with:
– Avermedia AVerTV A835 HD (ID 07ca:b835)
– Avermedia AVerTV A835 HD PRO (ID 07ca:a835)
– Avermedia AverTV A835 Green HD (ID 07ca:a835)
– TerraTec Cinergy T Stick (ID 0ccd:0093)
– TerraTec Cinergy T Stick 2 (ID 0ccd:00aa)
– Avermedia AverTV A825 (ID 07ca:0825)

$ git clone git://github.com/xgazza/DVB-AF9035_kernel-3.2.0.git
$ cd DVB-AF9035_kernel-3.2.0
$ make
$ sudo make install

3. Download the firmware(s)

$ cd /lib/firmware/
$ sudo wget http://xgazza.altervista.org/Linux/DVB/dvb-usb-af9035-01.fw
$ sudo wget http://xgazza.altervista.org/Linux/DVB/dvb-usb-af9035-02.fw

I downloaded these 2 firmwares, I do not know which one is used.

4. Reboot

$ sudo reboot

5. Check if device is properly loaded

see below

Solution 3

5. Check if device is properly installed

$ ls /dev/dvb
adapter0

If this command returns something like adapter0 => good
If it returns nothing => not good

6. Check with your TV application if the USB TV Tuner is recognized

I personally use Kaffeine How to make an Avermedia AverTV Volar Green HD work?.
In tab Television | Configure TV, I get a new tab called Peripherique 1.

How to make an Avermedia AverTV Volar Green HD work?
Note that for French TV, it is necessary to set the source with a shift of 167khz.

Solution 4

This process no longer makes the Volar Green functional in Ubuntu 14.04. The firmware has been re-mapped to dvb-usb-it9135-02 firmware instead of the dvb-usb-af9035 firmware which has completely broken my 4 tuner system. Used to work with 14.04 doesn’t now.

I think the dvb-usb-it9135 is the correct firmware for the Volar Black and it has been assumed that it is also correct for the Volar Green.

The Green and the Black are different chips – simples!!!! ask any meerkat.

Note: Use and implement solution 1 because this method fully tested our system.
Thank you 🙂

All methods was sourced from stackoverflow.com or stackexchange.com, is licensed under cc by-sa 2.5, cc by-sa 3.0 and cc by-sa 4.0

Leave a Reply