How can I recover data from a 2TB hard drive?

I have a Western Digital 2TB External Hard Drive. I basically use it to keep all my movies and videos. Its file system is NTFS, and currently I’m using 1.4TB. One night I turn it on and copied a 4GB file and there was no problem. Then I tried to copy another 6GB file and Ubuntu throw the following error: “Input/output error”. I tried to create a new folder with no luck. I still could read the disk an play a file, so I thought restarting the computer would solve the problem, but it didn’t. The next time, Ubuntu didn’t mount the disk.

After that I tried in another PC with Window 7. It throwed a message telling me: first, that the disk needs to be formatted, and second, a “Local Disk #: Is not accessible. Data error (cyclic redundancy check)”. Here is when I started to worry. I tried to fix the disk with CHKDSK (chkdsk \r). After about 5 hours, it crashed with the following error: “An unspecified error occurred”.

My guess to all this is that the disk is dying. :'(

Lastly I did one more thing. I installed GSmartControl on Ubuntu to see the SMART info and the attributes tab appears in red with the following line highlited:

197 Current_Pending_Sector  0x0032   197   197   000    Old_age   Always       -       977

Just to check, I left the disk on for about 2 minutes and then refreshed the page, and the Current_Pending_Sector RAW_VALUE increased from 977 to 979. My guess is that sectors on the disk are dying. Am I right?

If every time I turn on the disk more sectors are going to die, I need to copy the data fast. I don’t know if there is a solution on Windows, and I’m worried about the time that it could take to do it with the slowness of Windows. Basically my question is: How can I recover the data? (Or at least some of it). Is there any program on Ubuntu that can help me with this (If I’m still on time)?. My main concern is the size of the disk (2TB), so I think I would need at least another 2TB disk to copy to.

Any help would be appreciated.

Here is Solutions:

We have many solutions to this problem, But we recommend you to use the first solution because it is tested & true solution that will 100% work for you.

Solution 1

ddrescue How can I recover data from a 2TB hard drive?

To recover data from a failing hard disk any further read or write access to this drive needs to be avoided as this dramatically increases damage and may eventually lead to a complete failure to access this drive.

It is therefore recommended that you first read all data that are still accessible on your drive by creating an image of this drive. Recovering your data can then be done from this image.

Ddrescue is a tool that allows copying all data from your drive and save it to either another (healthy) drive, or to an image on a healthy drive. The drive you save your image to needs to be at least of the same size as the original drive was.

There is a detailed guide on how to do this on the Forensic Wiki. The first step will be to boot your system e.g. from a live rescue system or CD and run the following command in a terminal:

ddrescue --no-split </dev/hda1> <imagefile> <logfile>

Replace above <entries> according to your system setup.

You can then perform data recovery e.g by using testdisc or photorec on the generated imagefile.

Solution 2

There are several Answers similar to your on how to recover data such as this one here.

The key-part is dont panic – and dont plug in your external drive until you’ve got another one to transfer data with.

Once SmartDisk starts giving you red errors – you can read this as serious hard-disk corruption or imminent disk failure.

When you have another drive correctly formatted, use one of the recovery methods such as TestDisk or PhotoRec to try and recover data and transfer it onto your new external hard-drive.

Note: Use and implement solution 1 because this method fully tested our system.
Thank you 🙂

All methods was sourced from or, is licensed under cc by-sa 2.5, cc by-sa 3.0 and cc by-sa 4.0

Leave a Reply